Vacuum truck Renault Midlum WUKO SCK-4z for collecting waste liquid separator

Renault Midlum WUKO SCK-4z for collecting waste liquid separators

Year of production 2004

Two-chamber tank with a volume of 7,000 dm3, divided into:

- clean water chamber - 4000 dm3,

- sediment and dirty water - 3000 dm3.

Possibility to combine tanks into one

A special sewage cleaning vehicle is intended for:

- cleaning channels using a high-pressure water system, with the possibility of simultaneously sucking waste into the sludge tank using a suction-pressure system,

-removing impurities and sediments from street inlets and sewage manholes, pumping water from flooded basements, deep pits, various types of tanks,

- washing facades and small ground objects, such as monuments, bus shelters, as well as workstations and vehicles, using a water gun.

Vacuum pump - ZNMR rotary vane compressor

flow rate 600 m3/h,

URACA KD 716-G high pressure pump

flow rate: up to 315 l/min at a pressure of 170 bar

Equipment

Hydraulically driven compressor.

Telescopic boom extends and raises hydraulically

The length of the large winch hose is 120m (dn= 25mm).

The length of the small winch hose is 60m (dn=13mm).

Webasto – barrel parking heater, possibility of operation in winter

The high-pressure water system with a plunger pump works with various types of cleaning nozzles and special heads as well as a water gun, using a stream of water with an appropriately high pressure. The system is designed to operate at negative temperatures down to -15C and has the ability to remove water by blowing out its remains.

The suction and delivery system with a suction and delivery pump (compressor) works with a boom and a lower suction valve, using suction hoses.

Two-chamber tank divided into a clean water chamber and a sediment chamber, with the possibility of using the entire volume of the tank for clean water after opening the valve connecting both chambers.

The sludge tank has a bottom that opens and closes and is hydraulically locked.

Large hydraulically driven winch, with smooth regulation of rotational speed, tiltable within a radius of 1250 mm and a tilt angle of 180 degrees. The winch is equipped with a high-pressure hose with a hydraulic support system for laying the hose during its winding and a hose extension counter.

Small winch, hydraulically driven, with smooth regulation of rotational speed, with a high-pressure hose.

MORE INFORMATION AT NO.

show contacts (ENG.RUS.POL) WhatsApp and Viber

ATTENTION.

This announcement is solely commercial information and does not constitute an offer within the meaning of Art. 66,§ 1 of the Civil Code. The seller is not responsible for any errors or outdatedness of the advertisement